High Quality Cables for Electrical Control Panels – Easy and safe installations.

TOPFLEX V-K H05V-K & H07V-K

Electric cabinet wiring and domestic use.

TOPFLEX V-K H05V-K and H07V-K cable has been specially designed for installations that require a flexible cable due to the complex nature of their layout. This cable is specially suitable for domestic wiring. It may also be used for equipment wiring, distributors, cabinets and lighting. It is also recommended for installation under false ceilings. Cables with cross section up to 1 mm² are especially suited for signalling and monitoring installations.

TOXFREE ZH ES05Z1-K & H07Z1-K (AS)

Flexible and halogen free power cable for electrical panel wiring.

TOXFREE ZH ES05Z1-K and H07Z1-K (AS) is a LSHF safety cable. In the event of fire, it does not emit toxic gases, nor does it give off corrosive gases, avoiding any possible damage to people or electronic equipment. For these reasons it is highly recommended for use in public places such as: hospitals, schools, museums, airports, bus terminals, shopping malls, offices, laboratories, etc.

TOPFLEX MS TRI-RATED / H07V2-K

Internal wiring of electrical cabinets. (UL, CSA, BS, UNE…)

TOPFLEX MS Tri-rated H07V2-K cable has been designed for the internal wiring of electrical cabinets, switchboards and small electrical devices. Due to its manufacturing characteristics, it can be used in conduit or in flexible motor ducts, transformers and other machinery in general.

TOXFREE ZH H07Z-K

Flexible and halogen free (LSZH) power cable for public places.

TOXFREE ZH H07Z-K is a flexible cable for fixed and protected installations. It is highly recommended for use in public places such as: hospitals, schools, museums, airports, bus terminals, shopping malls, offices, laboratories, etc. Not suitable for wet places or immersed.

TOXFREE ZH OUTDOOR H07Z1-K (AS) Cu/Sn

Solar grounding cable, with tinned copper conductor

Toxfree® ZH Outdoor H07Z1-K (AS) Cu/Sn is a cable specially designed for ground connections in outdoor installations. The tinned copper conductor and special outer sheath compounds make this cable highly resistant to corrosion and ultraviolet (UV) degradation and prevent galvanic pair when connecting metals of different normal potential. It is a halogen-free cable with the highest CPR classification (B2ca-s1a,d1,a1) and UV protection according to solar standard EN 50618.

Top Cable, a global supplier to the world’s panel wire cables.

When it comes to electrical wiring, panel wire cables are a crucial component that ensures the safe and efficient flow of electricity in control panels and other industrial equipment.

Customers value Top Cable’s  panel wire cables for its flexibility and bending radius, due to the materials of our special PVC compound. Our wide range of cross-section and colours is also well appreciated in the market.

• Extra-flexible cables
• Temperature Resistant
• Flame retardant
• Wide range of colours

FREQUENT ASKED QUESTIONS (FAQ) ON PANEL WIRE CABLES

What type of cable is used for homes and buildings?

The best cable for homes and buildings is a flexible cable that typically contains two or three insulated conductors, one of them being a ground wire, wrapped together in a sheathing, and an outer sheath (or jacket). Top Cable recommends the TOPFLEX^® V-K H07V-K cable, or its LSZH version: TOXFREE^® H07Z1-K.

What type of cable is used in a panel wire?

The panel wire cables are specifically designed for use in electrical panels, control systems, and wiring within buildings. They are often used to connect various components in electrical systems and usually have a specific type of flexible insulation.

Are panel wire cables fire-retardant?

Yes, panel wire cables can be fire-retardant. For example, our cable TOXFREE^® H07Z1-K is fire non propagator based on EN 60332-3-22 and IEC 60332-3-22, flame non propagator based on EN 60332-1 and IEC 60332-1, halogen free based on EN 60754-1, Low corrosive gases emission according to IEC 60754-2. Its smoke density and light transmittance is >80% , based on EN 61034 / IEC 61034. Finally, the cable’s reaction to fire according European Norm CPR is B2_ca-s1a, d1, a1 according to EN 50575.

Which cable is recommended for domestic electrical installation?

For domestic and building use, Top Cable recommends the TOPFLEX^® V-K H07V-K cable, or its LSZH version: TOXFREE^® H07Z1-K.

What is the standard cable size for normal house wiring?

In a domestic installation, the electrical current to flow through determines the electrical cable sizes (or cross-section). For example, an air conditioning unit requires more current to operate than a lamp. Therefore, the cable cross-section connecting the air conditioning unit will be larger than the one connecting the light. More info in this article.

Why is it convenient to use halogen-free cables at home?

LSZH cables are very suitable for home improvement. Using low smoke halogen-free cables in a domestic installation enhances safety by reducing toxic emissions and smoke in case of fire, aligns with environmental standards, and helps meet regulatory requirements. It’s a smart choice for a safer home.

What is the point of the earth cable?

By providing a safe path for electrical current to flow to the ground, earthing prevents electric shocks, protects equipment from damage, and reduces the risk of fire hazards. When there is no earth wire, there is a greater risk of electric shock in case of faults.

In which installations is it recommended to use panel cables?

Panel wire cables can be used within a variety of construction sectors:

• Internal wiring of electrical cabinets.
• Switch control boards.
• Power switch gear.
• Instrumentation panels.
• Motor starters and controllers.
• Rectifier equipment.
• Small electrical devices.
• Wiring home appliances.
• Lighting solutions.
• Flexible motor ducts.
• Machinery in general.